FUEL INJECTOR CONNECTION

 
View Your Cart

There are no items in your cart.

 

500LB/HR MRE ATOMIZER RACING BILLET INJECTOR

500LB/HR MRE ATOMIZER RACING BILLET INJECTOR Image

These injectors have a Lifetime Warranty.


FUEL INJECTOR SPECIFICATIONS:


500 lb/hr MORAN INJECTORS


PART# MRE 500A

Static Flow Rate = 500

Impedence = Low

Resistance = 2.4

Fuel Pressure Rating = 90 psi

Nozzle Style = Atomizer Disc

Spray Angle = Large Fog with 45 degree Vapor Cone Pattern





MRE Atomizer Racing Billet Injector

EFI guru Mike Moran makes it easy for EFI engines to produce 1,000 to 4,000 HP with either gasoline or methanol, with the new M.R.E. Atomizer fuel injector. Machined from a proprietary material, coated with titanium nitride, these Atomizer injectors flow 500lb/hr @ 90 psi fuel pressure. The Atomizer disc is the NEW design. This new design exceeds the Powertip 5; more horsepower, faster throttle response and cuts spool up time in half on all force induction applications. All Moran injectors were designed as specifically for racing. The injectors operate linearly with pulse width as small as 1.2 milliseconds and opens with the standard 4 amp peak and 1 amp hold ECU drivers. Plus the M.R.E. Atomizer injector is a direct replacement for all standard injectors and are compatible with all aftermarket E.F.I systems out of the box, no injector driver adapters needed.




Our MRE Atomizer Injectors were researched, developed, engineered, and tested over 10 years by Mike Moran specifically for racing. Other injectors used for racing were originally designed to flow Compressed Natural Gas (CNG)!



Our 5mm projected tip design extends directly into the intake runner, beyond all others, ensuring max efficiency.



MRE Atomizer Racing Injectors are a proprietary product that you can’t get anywhere else. Each injector is built as per your order, flow tested and then shipped. Please call or email us if you have any questions, and we’ll be happy to assist you in any way.




Recommended Products

-12 FUEL FILTER HOUSING ASSEMBLY WITH MOUNTING BRACKETS & 10 MICRON M.R.E. SPEC. METHANOL SAFE FILTER…………………………..$488.00

Moran Motorsports recommends the MRE Spec. Filter Assembly for use with the MRE Injectors using methanol as it has been tested and proven not to hinder flow. The MRE Spec. Filter Assembly is a complete kit with includes mount, filter, filter housing, & fittings.



Filter - CAUTION

It is Mandatory to use a 10 Micron filter with our MRE Injectors. You must run a 10 micron filter between the injectors and the fuel pump, NOT between the fuel pump & fuel tank.


- For METHANOL Users: Moran Motorsports offers a 10 Micron stainless steel methanol safe filter with assembly.


- For GAS Users: Moran Motorsports recommends & sells Weldon 10 Micron fuel filters.




Your Price:$335.00