SKU: FIC80DEKAEV1FORD

80 LB Siemens Deka EV1 High Impedance Injector For Ford FI114992

Name: 80 LB Siemens Deka EV1 High Impedance Injector For Ford FI114992
Brand: Fuel Injector Connection
SKU: FIC80DEKAEV1FORD
Price: 69.95 USD
Availability: InStock

Fuel Injector Connection

$69.95

Sale Sold out

Shipping calculated at checkout.

Quantity must be 1 or more

ATTENTION: SIEMENS HAS THIS ITEM ON BACKORDER UNTIL END OF THE YEAR. IF YOU PURCHASE THIS LISTING, YOU WILL RECEIVE A 80LB SIEMENS DEKA 60MM INJECTOR (BODY STYLE IDENTICAL TO THIS LISTING) WITH AN EV6 PLUG. WE WILL SET UP THE INJECTOR WITH A COMPLIMENTARY EV6 TO EV1 HARD ONE PIECE PLUG ADAPTER. IF YOU HAVE ANY QUESTIONS OR CONCERNS, PLEASE FEEL REACH TO REACH OUT TO US.

80lb/h Siemens Deka High Impedance (Long Style) with EV1 Connector – FI114992

Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance Injectors

These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

This newly released injector from Siemens is based on the same design as the popular FI114961 60 lb/hr DEKA IV (DEKA 4) injector. The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications. We also offer the same injector with the EV6/USCAR connector as Part Number FI114991. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!

Features:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Specifications:
Static Flow Rate: 80lb/hr = 875 cc/min
Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Connector: EV1 Minitimer
Series: DEKA 4 ( DEKA IV )
O-Ring Type: Viton

Cross References:
Siemens FI114992
Siemens 110324

Part Number: FIC80DEKAEV1FORD

Please Read: Our fuel injector sets are custom fitted to your application. Please tell us your vehicle year, make, and model and leave the rest to us! Each set will be flow matched and come with a USB drive containing the data for your set.

Need a Wire or Height Adaptor?

Wire Adaptors

Height Adaptors

$6.50

This is a weatherproof ev6/uscar pigtail. Part Number: FICEV6PIG

$6.50

WEATHERTIGHT Part Number: FICDENSOPIG

$10.95

Part Number: FICDENSOEV1

$10.95

Part Number: FICDENSOEV6

Denso Injector to EV6 (USCAR) Harness One-Piece

$7.95

Part Number: FICDENSOEV6ONE

$6.50

Fits all EV1 injector plugs with lock and weathertight seal. Part Number: FICEV1PIGTAIL

$5.95

Weather tight Denso harness end Part Number: FICDENSOEND

$5.95

Uscar harness end Part Number: FICUSCAREND

$5.95

Weather tight mini timer end Part Number: FICEV1END

$5.95

Weather tight Delphi Multec 2 wire harness end Part Number: FICMULTECEND

$7.95

This adapter is 100% waterproof making it a snap to put late model injectors in your car without any wire harness modifications. Made in the USA with only high quality connectors. Part Number: FICE...

$7.95

This adapter is 100% waterproof making it a snap to put late model injectors in your car without any wire harness modifications. Made in the USA with only high quality connectors. Part Number: FIC...

$10.95

Use this connector to use an EV1 injector with a USCAR harness. Part Number: FICEV1USCAR

$10.95

Use this harness to put late model EV6 injectors in your Nissan, Subaru, etc. that uses a Denso harness. 100% waterproof. Part Number: FICEV6DENSO

$7.95

$7.95

This adapter is 100% waterproof making it a snap to put late model injectors in your car without any wire harness modifications. Made in the USA with only high quality connectors. Part Number: FIC...

$10.95

Use this connector to use a (USCAR) injector on a Honda, Acura, Hayabusa OBD2 harness. Part Number: FICEV6OBD2WIRE

Fuel Injector Adapter Kit (Jetronic to USCAR) - Fuel Injector Connection

$63.20

- Adapts Jetronic/Minitimer style harness to USCAR fuel injector - Single-piece design for improved reliability and aesthetics over our competitors adapters- M-14464-U2J kit adapts USCAR style harn...

Fuel Injector Adapter Kit (USCAR To JETRONIC) - Fuel Injector Connection

$63.20

- Adapts USCAR style harness to Jetronic/Minitimer style injector- Single-piece design for improved reliability and aesthetics over our competitors adapters- Packaged in sets of (8) Part Number: ...

Jetronic (EV1) Injector to USCAR Harness

$10.95

USE THIS HARNESS TO PUT LATE MODEL EV6 INJECTORS INTO A EV1 HARNESS MADE OF HIGH QUALITY PARTS 100% WATERPROOF Part Number: FICJETRONICUSCAR

EV6 Female to EV1 Male Injector Adapter Set

$124.95

INCLUDES EVERTHING NEEDED TO PUT A LS2 INJECTOR IN A LS1,LS6 OR AFTERMARKET INTAKE USING STD INJECTOR (60MM O-RING TO O-RING) KIT INCLUDES: 8 BILLET TOP HATS WITH VITON O RINGS 8 LOWER O RINGS TO...

$156.95

INCLUDES EVERTHING NEEDED TO PUT A LS3 INJECTOR IN A STOCK TRUCK INTAKE KIT INCLUDES: 8 BILLET TOP HATS WITH VITON O RINGS 8 LOWER O RINGS TO FIT THE INTAKE 8 PLUG AND PLAY WIRE ADAPTERS Part Nu...

$10.95

USE THIS CONNECTOR TO USE A DENSO INJECTOR ON A GM TRUCK 5.3 - 6.0 - 8.1 NEW GEN ENGINE THAT USES THE MINI DELPHI PLUG Part Number: FICMINIDENSO

EV1 Injector to Mini Delphi (Multec II) Harness

$10.95

THESE WILL CONVERT YOUR 2000-1007 GM TRUCK WIRE HARNESS TO ACCEPT THE EV1 STYLE INJECTOR PLUG THESE MAKE YOUR INJECTOR SWAP A PLUG AND PLAY Part Number: FICMINIEV1

EV6 Injector to Mini Delphi (Multec 2) Harness

$10.95

USE THIS CONNECTOR TO USE A EV6 INJECTOR ON A GM TRUCK 5.3 - 6.0 - 8.1 NEW GEN ENGINE THAT USES THE MINI DELPHI Part Number: FICMINIEV6

$12.95

Universal Fits 90% of injectors 100% sealed 2 foot lead

$10.95

Part Number: FICEV6EV1W

$124.95

INCLUDES EVERTHING NEEDED TO PUT A LS3, LS7, LS9 OR LSA INJECTOR IN A LS1, LS6 OR AFTERMARKET INTAKE USING STD INJECTOR (60MM O-RING TO O-RING) KIT INCLUDES 8 BILLET TOP HATS WITH VITON O RINGS ...

522-011 - Fuel Injector and Glow Plug Harness (Stock Replacement)

$75.33

~~$88.62~~

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness co...

522-005 - Valve Cover Gasket Harness Connector Pigtail (Stock Replacement)

$34.51

~~$40.60~~

522-024 - Valve Cover Gasket and Harness Repair Kit (Stock Replacement)

$68.97

~~$81.14~~

This GB complete valve cover gasket kit features an updated integrated internal valve cover gasket harness, which supplies electrical signals to the glow plugs and fuel injectors. The kit also incl...

522-023 - Valve Cover Gasket and Harness Repair Kit (Stock Replacement)

$71.28

~~$83.86~~

522-004 - Valve Cover Gasket Harness Connector Pigtail (Stock Replacement)

$34.51

~~$40.60~~

522-010 - Fuel Injector and Glow Plug Harness (Stock Replacement)

$75.33

~~$88.62~~

$8.95

These are machined billet adapters that go over the top of the shorter new style injector to allow then to fit in appllications that use a standard 60 mm injector and an 11mm o-ring. There are 1000...

$8.95

These are machined billet adapters that go over the top of the shorter new style injector to allow then to fit in appllications that use a standard 60 mm injector and a 14mm o-ring. There are 1000'...

$8.95

These are machined billet adapters that go over the top of the shorter new style injector to allow then to fit in applications that use a standard 60 mm injector and a std 14mm o ring. There are 1...

$8.95

These are machined billet adapters that go over the top of the shorter new style injector to allow then to fit in appllications that use a standard 60 mm injector and an 11mm o-ring. There are 100...

$8.95

These are machined billet adapters that go over the top of the shorter new style injector to allow then to fit in appllications that use a standard 60 mm injector. There are 1000's of applications ...