TSP 347 to 398 C.I.D. Resleeved Gen 4 Aluminum Short-Block, 3.622" Stroke Applications
**Power Bore Sleeves are not available below 4.07" bore size**
All Texas Speed & Performance resleeved short-blocks use a NEW resleeved Gen 4 aluminum block with your choice of Power Bore or Darton dry sleeves! The standard price includes a fully-assembled short-block with a 3.622" stroke crankshaft with your choice of 24x or 58x reluctor wheel. All resleeved blocks are fully machined and assembled at our facility, and we use state-of-the-art Power Bore and Darton dry sleeves that have a much higher tensile strength than the standard GM sleeves. They are also much thicker than the sleeves used in GM blocks. We do not recommend running larger than a 4.125" bore size if you are using any type of power-adder.
The standard price also includes your choice of Wiseco or CP Pistons in ranging in size from 3.903" to 4.185" bore sizes. All available bore sizes and piston volumes are listed in the corresponding drop-down menus. All piston sets listed are 2618 forgings and feature lowered ring lands to accommodate nitrous and boost applications, should the customer choose to use them. This engine selection is for all available engine builds using a 3.622" stroke crankshaft. Both 3.622" and 4.00" stroke applications are recommended if you plan on using any power-adders. We also offer 4.10" and 4.125" stroke applications, but we recommend those setups for naturally aspirated use only.
We offer multiple brands of connecting rods and crankshafts to suit any type of application. Every engine will come standard with the necessary oil and coolant plugs already installed in the block. We do offer an optional conversion package that will include the LS2 timing cover with a camshaft position sensor, LS2 valley cover, LS2 lifter trays, LS2-specific timing set, and plug-n-play harness extensions for the camshaft position and knock sensor harnesses. This will be required if you are installing the engine into an LS1 vehicle. Feel free to give us a call, and we will be more than happy to put an itemized estimate together for you! We also offer additional discounts if you pay via a cashier's check or wire transfer. All engines will ship via truck freight, so if are purchasing online the shipping costs listed will NOT be correct! We will contact you with a shipping cost after your order has been placed. All prices listed do not include the applicable shipping costs!
We do offer an upgrade to 1/2" head studs for those looking to run a large amount of nitrous or boost. The price listed for the 1/2" head stud upgrade will include the cost of the ARP hardware, as well as the necessary machine work. All of the PRC aftermarket casting cylinder heads already have the larger bolt holes to accommodate 1/2" head studs.
All TSP engines will include two oil changes worth of Driven Racing break-in oil for no additional cost. Proper break-in oil and procedures for your engine are just as important as the build process! The Driven Racing break-in oil allows for proper ring sealing against the cylinder walls upon start-up, as well as for the break-in period once the engine is up and running. Most off-the-shelf engine oils do not have the necessary ZDDP additives to allow for proper break-in of a new engine, and we want to take every precaution possible to ensure that your new TSP engine receives a proper break-in! We also offer the Driven Racing oil for your new engine once your break-in is complete. We recommend using either the HR2 conventional non-synthetic or the LS30 full synthetic oil. Please note that the Driven Racing LS30 is the ONLY synthetic oil we recommend using in your engine because it retains the necessary ZDDP additives.
Bore & Stroke Combinations
3.903" Bore x 3.622" Stroke = 347 CID
4.005" Bore x 3.622" Stroke = 365 CID
4.01" Bore x 3.622" Stroke = 366 CID
4.03" Bore x 3.622" Stroke = 370 CID
4.07" Bore x 3.622" Stroke = 377 CID
4.100" Bore x 3.622" Stroke = 382 CID
4.125" Bore x 3.622" Stroke = 387 CID
4.155" Bore x 3.622" Stroke = 393 CID
4.185" Bore x 3.622" Stroke = 398 CID
WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov